Table of Contents
Advertisement
CONNECTIONS
FOR YOUR "iV
STEP 5. MAKE EXTERNAL
SPEAKER
CONNECTION
TO "IV
l.
Place the SPEAKERS
switch on the back of the TV
in the INT position.
2.
Connect
the two external
speaker
terminals.
Ob-
serve polarity
of the connections;
silver speaker
wire to the red terminal
and copper speaker wire to
the black terminal.
Use 8-ohm speakers
only.
3.
Place the SPEAKERS
switch on the back of the TV
in the EXT
position.
4.
Use the VOLUME
control
on the TV or on the
remote control
to adjust the volume of the external
speakers.
STEP 6. MAKE SURROUND
SOUND
CONNECTION
TO TV
1.
Mount and connect
the optional
Surround
Sound
speakers
by following
the instructions
provided
with the speakers.
2.
In the AUDIO
Menu, set the TV to STEREO.
3.
Use the SURROUND
option in the AUDIO
Menu
to adjust the volume of the surround speakers.
4.
Use the VOLUME
control to adjust the volume of
the TV.
5.
The level of the Surround
sound varies relative to
the difference
between
the left- and right-channel
stereo signals.
The degree
of the Surround
sound
effect
depends
on the program
source
you are
using. Some sources,
especially
video tape, provide
greater
sensation
of Surround
sound than may be
obtained
from a standard TV broadcast.
NOTE: The surround jack is always active. Therefore, the
position of the speaker switch does not affect the operation
of surround speakers.
CAUTION: The Surround Sound output has an 8-ohm sys-
tem impedance. It is for use with two 16-ohm speakers con-
nected in parallel. Use of non-surround speakers may
damage your TV.
VIDEO 1 IN
(DO
LOOP OUT
VIDEO 2 IN
VIDEO
o 6-b
R
L
S-VIDEO 1 IN
©©©
L_
li Ohm
_t_t
ft4mUer
6 ol_m
Advertisement
Table of Contents
