Table of Contents
Advertisement
Chapter 5 NVIDIA RAID Introduction
14. Select the desired type of RAID array you want to convert. Then Select Next.
1 5 . You are prompted to select the desired Free Disk(s) to add to the bootable RAID
a r r a y . C l i c k Finish.
At this point, NVRAID starts converting the single disk RAID array into a multi-disk
RAID array in a bootable format.
Note: Conversion may take 1-2 hours depending on disk size.
II) The user must create a combination installation CD that includes Windows
2000 and SP3 or SP4 fixes integrated in. To create the combination installation
CD, refer to the following website:
http://www.microsoft.com/windows2000/downloads/servicepacks/sp4/HFdeploy.
htm
Note: If the end user chooses not to install Windows 2000 Service Pack 3 or 4, RAID
is still supported on Windows 2000. However, the end user will not be able to create
a bootable RAID volume.
62
2005-3-16, 17:34
Hide quick links:
Advertisement
Table of Contents
