Foxconn NF3UK8MA series User Manual page 48

Chapter 3 BIOS Description
This option is used to turn off hard disk power if the hard disk is idle for a given
period of time. The setting values are Disabled and 1Min-15Min.
This option is used to define the continuous HDD idle time before the HDD
enters power saving mode. The setting values are Disabled and Enabled.
PBTN (Default: Instant-Off)
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply. When "Instant-Off" is selected, press
the power switch to immediately turn off power. When "Delay 4 Sec." is
selected, press and hold the power button for four seconds to turn off power.
(Default: Disabled)
This option is used to enable or disable the feature of booting up the system
on a scheduled time/date. The setting values are Disabled and Enabled.
When the Power-On by Alarm set as "Enabled", this option will be modified. It
is used to set the timing for the start-up date. The setting values contain 0 - 31.
When the Power-On by Alarm set as "Enabled", this option will be modified. It
is used to set the timing for the start-up date. The setting values contain hh: 0-
23; mm: 0-59; ss: 0-59.
This option is used to enable or disable intruder detection function. The set-
ting values are: Disabled and Enabled.
40 2005-3-16, 17:37