Foxconn NF3UK8MA series User Manual page 49

Chapter 3 BIOS Description
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses each time the machine is turned on.
The setting values are: Disabled and Enabled.
This option is used to define the system resource control scheme. If all cards
you use support PnP, t h e n s e l e c t Auto (ESCD) and the BIOS will automatically
distribute interruption resources. If the ISA cards you installed not support-
ing PnP, you will need to select "Manual" and manually adjust interruption
resources in the event of hardware conflicts. However, since this motherboard
has no ISA slot, this option does not apply.
Press the <Enter> key, then manually set IRQ resources.
41 2005-3-16, 17:33