Foxconn NF3UK8MA series User Manual page 40

This option is used to select the system performance. If it is set to "Optional",
BIOS will use the most stable settings. If it is set to "Aggressive", BIOS will use
over clocked settings for higher performance but with higher risk of instability.
If it is set to "Expert", BIOS allows full customization of performance options.
Advanced users only.
Max Memclock (MHz)
When it is set to Manual in "DDR Timing Setting by", user can place an A r t i f i c i a l
memory clock limit on the system. Memory is prevented from running faster
than this frequency. The available setting values are: 100, 133, 166, 200, Auto.
CAS# Latency (Tc l )
This option controls the CAS latency, which determines the timing delay (in
clock cycles) before SDRAM starts a read command after receiving it. The avail-
a b l e s e t t i n g v a l u e s a r e : A u t o , 2 . 0 , 2 . 5 , 3 . 0 .
Chapter 3 BIOS Description
32 2005-3-16, 17:35