Recalling A Waveform - Fluke 91 Series II User Manual

Using Additional Capabilities
2. Use (PREVIOUS SCREEN) or
SCREEN) to step through the saved screens.
3. Press to replace the actual setup with the
recalled setup that belongs to the saved screen.
Recall Screen Menu

Recalling a Waveform

1. Press (RECALL WAVEFORM) to recall a saved
waveform from waveform memory. A list of all used
waveform memories now appears.
2. Use and to highlight the required waveform.
The View Area displays the saved waveform in
compressed form.
3. Press to recall the selected waveform. A
displayed memory waveform is indicated with the
waveform memory number.
(NEXT You can display a maximum of four waveforms at a time. If
you attempt to display a fifth waveform, a message lets you
know you have exceeded the maximum number allowed
and suggests that you remove the oldest recalled
waveform.
6 - 9