6 - 4
In this example, the markers are defining sample points for
measuring frequency.
Markers may be easier to see when you press
freeze the waveform.
7. Press
to close the window.
NOTE
Adding a Cursor Main Reading
From the ADD MAIN READING list box, use
to highlight the reading to display, then press
select. Repeat this for more readings.
In making cursor measurement calculations, the ScopeMe-
ter test tool uses waveform activity between the cursors.
Figure 6-3 Cursor Main Readings List Box
The measurement results are displayed in the bottom dis-
play area. A maximum of five measuring functions can be
turned on at the same time.
dV (for delta volts) Measures the voltage difference
•
between the cursors.
•
dt (for delta time)
and
between the cursors.
1/dt (for relative frequency) Shows the reciprocal value
•
of dt.
91/92/96/99/105
Users Manual
or
Measures the time difference
to