Recalling From Memory; Recalling A Screen - Fluke 91 Series II User Manual

6 - 8
press to open the More Save window.
Figure 6-5 More Save Window
First choose what you want to copy, a waveform or a
setting. Then determine from which memory you want to
copy. On pressing (SELECT ITEM), you must choose
the memory to which you want to copy. The test tool starts
automatically with the next available memory.
Use this function to organize the sequence of your
waveforms or settings. This can be useful in semi-
automatic measurements.
91/92/96/99/105

RECALLING FROM MEMORY

You can review screens and recall waveforms and setups
from memory at any time.
• Press to open the Recall from Memory menu.
Recall Menu
CAUTION
A Master Reset destroys all memory contents and
leaves the initial setup with its default settings. Refer
to "Master Reset configuration" further on in this
chapter for a complete discussion of Initial Setup.

Recalling a Screen

You can display already saved screens with related setups.
This is presented as a picture that can no longer be
changed. Use this when you want to view a measurement
later.
1. Press (RECALL SCREEN) to view a saved
screen from screen memory (memory #).
At the same time the Recall Screen function key menu
is activated.
Users Manual
91 92