Rotary Switch - Fluke 87 Series IV User Manual

Model 87 & 89 Series IV
Users Manual

Rotary Switch

Turn the meter on by selecting any measurement function
(identified with white letters around the rotary switch). The
meter presents a standard display for that function (range,
measurement units, modifiers, etc.) The display may also
be influenced by some of the choices made in Setup.
Use the blue button to select any rotary switch alternate
function (labeled in blue letters). You can also use other
buttons to choose modifiers for the selected function.
When you turn the rotary switch from one function to
another, a display for the new function appears. Button
choices made in one function do not carry over into
another function.
With Model 89, a VIEW MEM switch position is available;
refer to Chapter 4 for more information.
2-4
The rotary switch is shown in Figure 2-2. Each position is
described in Table 2-1.
nS
mV
ac+dc
V
ac+dc
mV
dB
V
dB
OFF
Figure 2-2. Rotary Switch
F
C
A
mA
A
A
mA
ac+dc
A
ac+dc
VIEW MEM
CLEAR MEM
tc012f.eps