Functional Description; Intended Use - Festool C 12 Li Instruction Manual

Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging current, pulsating (only NiCd, NiHM)
Charging times for
Permitted charging temperature range
Temperature monitoring
Battery pack
Voltage
Capacity
Weight
* Speed specifications with fully charged battery
pack.
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold out
this page for having always an overview of the ma-
chine.
[1-1] Torque thumbwheel
[1-2] Bit store
[1-3] LED lamp
[1-4] Gear switch
Cordless drills are suitable for drilling into metal,
wood, plastics and similar materials as well as in-
serting and tightening screws.
The charger TRC 3 is designed for charging the bat-
tery packs listed.
LiIon 1.5 Ah/ 3.0 Ah, 80 %
LiIon 1.5 Ah/ 3.0 Ah, 100 %
BPC 12 Li - 1.5 Ah BPC 12 Li - 3.0 Ah BPC 15 Li - 3.0 Ah
10.8 V
1.5 Ah
0.31 kg (0.68 lbs.) 0.49 kg (1.08 lbs.) 0.58 kg (1.50 lbs.)
** The maximum speed is reduced in the lower
torque stages.

Functional description

[1-5]
[1-6]
[1-7]
[1-8]
[1-9]
[1-10]
[1-11]
[1-12]

Intended use

The user bears the responsibility for damage and
accidents caused by improper use; this also in-
cludes damage and wear caused by continuous
use in industry.
10.8 V
3.0 Ah
Drilling symbol
Screwdriving symbol
Drilling/Fastening selector switch
Right/left switch
On/Off switch
Capacity display
Belt clip
Buttons for releasing the battery pack
WARNING
TRC 3
120 V ~
60 Hz
7.2 - 18 V=
max. 3 A
approx. 0.06 A
approx. 25/ 55 min
approx. 35/ 70 min
-5 °C to +45 °C
via NTC resistor
14.4 V
3.0 Ah
9