Functional Description; Intended Use - Festool DWC 18-2500 Instruction Manual

Cordless drywall screwdriver
Weight with magazine attachment (without
battery pack)
* Speed specifications with fully charged battery pack.
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging, intermittent (NiCd, NiMH)
Charging times for BP, BPS and BPC battery packs
Li-ion 1,5 Ah, 80 %/100 %
Li-ion 3,0 Ah, 80 %/100 %
Li-ion 4,2 Ah, 80 %/100 %
Permitted operating temperature range
Temperature monitoring
Safety class
Battery pack
Voltage
Capacity
Weight
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
[1-1] Bit store
The drywall screwdriver is designed for the follow-
ing works:
DWC 18-4500
– Gypsum plaster boards on metal profile rails (≤
0.88 mm) with drywall screws with fine thread
– Gypsum plaster boards on metal profile rails (≤
2.25 mm) with drywall screws, self-drilling
– Gypsum plaster boards on wooden constructions
10
DWC 18-2500
1.5 kg
BPC 18
18 V
4.2 Ah
0.7 kg

Functional description

[1-2]
[1-3]
[1-4]
[1-5]
[1-6]

Intended use

with drywall screws with coarse thread
DWC 18-2500
– Gypsum fibre boards on metal and wooden con-
structions with drywall screws with milling ribs
– Chip boards/OSB on wooden constructions with
wood construction and chip board screws up to
dia. 5 mm
DWC 18-4500
On/Off switch
Right/left switch
AUTO/MAN switch
Depth stop
Bit
1.5 kg
TCL 3
120 V ~
60 Hz
10,8 - 18 V=
max. 3 A
approx. 0,06 A
approx. 25/35 min.
approx. 55/70 min.
approx. 70/90 min.
-5 °C to + 45 °C
via NTC resistor
/II