IGP Commands
disable rip triggerupdate
disable rip triggerupdate
Description
Disables the trigger update mechanism. Triggered updates are a mechanism for immediately notifying a
router's neighbors when the router adds or deletes routes or changes their metric.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
Triggered updates occur whenever a router changes the metric for a route and it is required to send an
update message immediately, even if it is not yet time for a regular update message to be sent. This will
generally result in faster convergence, but may also result in more RIP-related traffic.
Example
The following command disables the trigger update mechanism:
disable rip triggerupdate
History
This command was available in ExtremeWare XOS 10.1.
742
ExtremeWare XOS 11.0 Command Reference Guide