Configure Bgp Delete Network - Extreme Networks ExtremeWare XOS Command Reference Manual

configure bgp delete network

configure bgp delete network {address-family [ipv4-unicast |
ipv4-multicast]} [all | <ipaddress>]
Description
Deletes a network to be originated from this router.
Syntax Description
address-family
all
ipaddress
Default
If no address family is specified, IPv4 unicast is the default.
Usage Guidelines
None.
Example
The following command deletes a network to be originated from this router:
configure bgp delete network 192.1.1.12/30
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
The address family to which the network routes will be exported. BGP
supports two address families: IPv4 Unicast and IPv4 Multicast.
Specifies all networks.
Specifies an IP address and a netmask length.
configure bgp delete network
791