IGP Commands
disable rip triggerupdate
disable rip triggerupdate
Description
Disables the trigger update mechanism. Triggered updates are a mechanism for immediately notifying a
router's neighbors when the router adds or deletes routes or changes their metric.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
Triggered updates occur whenever a router changes the metric for a route and it is required to send an
update message immediately, even if it is not yet time for a regular update message to be sent. This will
generally result in faster convergence, but may also result in more RIP-related traffic.
Example
The following command disables the trigger update mechanism:
disable rip triggerupdate
History
This command was available in ExtremeWare 2.0
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1798
ExtremeWare 7.5 Command Reference Guide