Front-Panel Description; Rear Panel Description - Extreme Networks EAS 100-24t Switch Hardware Installation Manual

EAS 100-24t (LED Per 10/100/1000 Mbps SFP Port):
LED Indicator Color
Link/Act/Speed Green/
Orange

Front-Panel Description

Twenty 10/100/1000Mbps BASE-T ports
●
Four Combo 10/100/1000BASE-T/SFP ports located to the right
●
One female DCE RS-232 DB-9 console port
●
LEDs for Power, Console, Link/Act/Speed for each port
●
Figure 2: Front Panel of the EAS 100-24t

Rear Panel Description

The rear panel of the switch contains an AC power connector. The AC power connector is a standard
three-pronged connector that supports the power cord. Plug-in the female connector of the provided
power cord into this socket, and the male side of the cord into a power outlet. The switch automatically
adjusts its power setting to any supply voltage in the range from 100 ~ 240 VAC at 50 ~ 60 Hz.
Figure 3: Rear panel view of the EAS 100-24t
Extreme Networks EAS 100-24t Switch Hardware Installation Manual
Status Description
Solid Green When there is a secure 1000Mbps Ethernet connection
(or link) at any of the ports.
Blinking Green When there is reception or transmission (i.e. Activity—
Act) of data occurring at a Fast Ethernet connected
port.
Solid Orange When there is a secure 100Mbps Ethernet connection
(or link) at any of the ports.
Blinking Orange When there is reception or transmission (i.e. Activity—
Act) of data occurring at an Ethernet connected port.
Light off No link.
Front-Panel Description
13