Extreme Networks EAS 100-24t Switch Hardware Installation Manual page 29

Figure 16: Assigning the Switch an IP Address
#config ipif System ipaddress 10.1.1.1/255.0.0.0
Command: config ipif System ipaddress 10.1.1.1/8
Success.
#
In the above example, the switch was assigned an IP address of 10.1.1.1 with a subnet mask of 255.0.0.0.
(the CIDR form was used to set the address (10.1.1.1/8). The system message Success indicates that the
command was executed successfully. The switch can now be configured and managed via Telnet and
the CLI or via the Web-based management.
Extreme Networks EAS 100-24t Switch Hardware Installation Manual
IP Address Assignment
29