Table of Contents
Advertisement
3
Connecting the Switch
C H A P T E R
Switch to End Node
End nodes include PCs outfitted with a 10, 100 or 1000 Mbps RJ-45 Ethernet Network Interface Card
(NIC) and routers. An end node connects to the switch via a twisted-pair UTP/STP cable. Connect the
end node to any of the ports of the switch. The Link/Act LEDs for each Ethernet port will light green or
amber when the link is valid. A blinking LED indicates packet activity on that port.
Figure 9: Connecting the Switch to an End Node
Extreme Networks EAS 200-24p Switch Hardware Installation Manual
21
Advertisement
Table of Contents
