Troy-Bilt 1919 Owner's Manual page 14

TROU B LES H OOT! NG
Problem
No AC output is avaHabme,
but engine is running.
When moads are
connected_ engine runs
good but bogs down°
CaUS_
H. Circuit breaker is open.
2. Poor connection or defective cord set.
3. Connected device is bad.
4. Fault in generator.
I. Short circuit in a connected load.
2. Generator is overloaded.
3. Engine speed is too slow.
4. Shorted generator circuit.
Solution
I. Reset circuit breaken
2. Check and repair.
3. Connect another device that is in
good condition.
4. Contact Authorized Service Facility.
I. Disconnect shorted electrical load.
2. See "Don't Overload Generator".
3. ContactAuthorized Service Facility.
4. Contact Authorized Service Facility.
Engine shuts down during ©ut of gasoline. Fill fuel tank.
operation°
Engine macks power. Load is too high. See "Don't Overload Generator".