Watching Tv Programs - Toshiba CX27F60 Owner's Manual

Watching TV Programs
• First set the TV/CABLENCR switch on the Remote Control to the "TV" position.
1
CX27F60
ANT/VIDEO- J ?
3 2 I
CX32F60
3 2 1
Press POWER to turn on the TV.
The following on-screen information will
be displayed for a few seconds.
• Antenna mode (when in the TV mode).
• Channel number or the VIDEO mode
selected.
• Channel label (if previously preset).
• Stereo or SAP audio status.
m
STEREO
SAP
ANT 1
ABCD
TV 4
To turn off the -rv, press POWER again.
Select a channel in one of the following two ways.
• To scan the memorized channels in numerical sequence
Press CHANNEL • to select the next higher channel.
Press CHANNEL • to select the next lower channel.
Press the button again to select the next memorized channels.
• To select a channel directly
Press the Channel Number buttons (0-9 and 100).
To select channel 4, press "4" (or press "0", "4").
To select channel 38, press "3", "8".
To select channel 125, press "100", "2", "5" in sequence.
STOP qEVJ PLAY F_
LOCATE S - PIP
RED PAU_E';IILL SLOW TV%'CR
® # %9
nl
TV/VIDEO
m2
2
3
Notes:
• The-VOLUME •/• buttons on the TV.
function as the -/+-buttons while any of
the menu display_-_Pic_ure, Audio, Setup
o_rOption) is on the screen.
• The ANTNIDEO button onthe TV func-
tions as the ADV button while any of the
menu displays (Picture, Audio, Setup or
Option) is on the screen.
3
If you cannot select certain channels, either T_/ [off the air) or
CABLE channels
Check if the TV/CABLE function ;isproperly, set. See page 19.
Press VOLUME A_' to adjust the ,volume.
To increase the volume, press •.
To decrease the volume, press •
VOLUME
-I
fO O)P_TR0t_ PUSH VOL
Watching Video Input
The TV/V}DEO button (or ANT/VIDEO button on the TV) is used to view
the signals coming from other devices such as VCR's or Video Dis(;
Players connected to this TV.
Details are on page 40.
Auto-Power-Off
If a vacant channel is tuned or TV broadcast for a day is finished, the 7V
will automatically turn off after about 15 minutes.
This feature does not operate in the VIDEO mode.
Last Mode Memory
If the power is cut off while you are viewing the TV and the power: is
resupplied, the TV is turned on automatically by the LastMode Memory
feature. If the power is going to be off or when you leave home for a
long time, remove the power plug from the wall outlet to prevent the TV
from turning on in your absence.
Z _
Q::.
_j
? :< ,
i,LI i;;ii t: i ¸
O
E
B
t-
t- O
==>
Em
E.__.
21