Turning The Tv On; Watching Tv Programs - Toshiba 20V300A Owner's Manual

Turning the TV on

Switching on the TV
Connect the power cord to the TV and a wall
outlet.
1
Press f/I on the right side of TV or f on the
remote control.
01
The f/I Power indicator lights in green.
Note:
If you watch black and white programs when the
color system mode is set to Auto, color noise
may appear on the screen. In this case select the
appropriate Color system (For the system
of each country or region, refer to pages 14 and
26).
Switching the TV to standby mode
Press f on the remote control or f/I on the TV
side panel to switch to the standby mode.
The f/I Power indicator lights up in red.
Notes:
• This TV is not fully disconnected from the main
supply, as minute current is consumed even
when f/I is in standby mode. When the TV will
not be used for a long period of time, such as
during vacation or travel, remove the power
plug from the wall outlet.
• The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a
vacant channel or a station that completes its
broadcast for the day. This function does not
work in external input or Blue screen Off mode.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the
TV automatically when power is applied again.
If power is going to be off for a long time and
you are going to be away from your TV, unplug
the power cord to prevent the TV from turning
on in your absence.

Watching TV programs

Selecting the menu language
Choose from 5 different languages (English,
Chinese (CS), Malay, Thai or Vietnamese) for the
on-screen display.
1
Press MENU, then press 1 or 2 to display
SET UP menu.
Getting started
2
Press t or s to select Language.
3
Press 1 or 2 to select the desired language.
Changing the program position
1
Enter the desired program position number
using the Number buttons on the remote
control.
For program positions below 10, use 0
and the required number e.g., for program
position 1, press "0" and then "1".
2
You can also change the program position by
using P s or P t.
The program position will be displayed on
the screen with the Mono/Stereo/Dual audio
status.
Note:
The program position selection change between
different format channels takes several seconds.
Switching between two program positions
You can switch two program positions without
entering actual position number each time.
1
Select the fi rst program position you want to
view.
2
Select the second program position with the
Number buttons (0-9).
3
Press
displayed.
Each time you press
and forth between the two program positions.
Displaying the on-screen information
1
Press CALL to display the following on-
screen information.
The information will disappear in 6 seconds.
• Program position or external input mode
selected
• Mono/Stereo/Dual audio status
2
To erase the display instantly, press CALL
again.
SET UP
Language English
Auto tuning OK
Manual tuning OK
Picture position OK
MENU EXIT
Back Watch TV
. The previous channel will be
, the TV will switch back
04
13