Connecting A Vcr With An S-Video Jack - Toshiba CX27F60 Owner's Manual

Connecting a VCR with an S-Video Jack
If you connect a VCR with an S-video jack to the S-VIDEO jack on the back of the TV, 'you must also conrect the audio
cables to the AUDIO jacks of the VIDEO 1 IN jacks on the back of the TV. The S-video cable only carries the video signal.
Audio signals are separate.
Antenna/Cable
lead-in
See page 7 for detailed Antenna/Cable TV connection.
Antenna Antenna
input output VCR
Audio
outputs
S-Video
output
1
Turn the TV and VCR ON.
S-Video cable (not supplied)
Audio cable (not supplied)
Back of TV
A_N_T_I ANT(75£z)_
/
2
Press TV/VIDEO (or ANT/VIDEO) to select "VIDEO 1".
3 Operate your VCR norma!lly.
Notes:
• When the S-video (:able is connected to the S-VIDEO IN
jack, the video cable (phono-type) does not have to be
connected.
• The S-VIDEO jack accepts SEPARA-FED Luminance/
Chrominance (Y-C) signals conforming to the NTSC
standard.
,=_
,-)
o
t_
0
>
t-
t_
t-
O
t_
>
t-
t-
Q
41