Maintenance; Maintenancechart - Snapper NSXPV2270E Operator's Manual

Maintenance
MaintenanceChart
WAeNING
DONOT attempt any maintenance,adjustments or service
with engine and blade running. STOPengine and blade.
Removethe starter insert. Disconnect spark plug wire and
secure away from spark plug. Engine and components are
HOT.Avoid serious burns, allow sufficient time for all com-
ponents to cool. Wear heavy leather gloves when handling
or working around cutting blades. Blades are extremely
sharp and can cause severe injury.
EmissionsControl
Maintenance, replacement, or repair of the emissions control
devices and systems may be performed by any non-road
engine repair establishment or individual. However, to obtain
"no charge" emissions control service, the work must be
performed by a factory authorized dealer. See the Emissions
Warranty.
ii!i i !!! i!ii i! ! !! !! ! ! !! ! i!! !i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Every8 Hoursor Daily
Checksafety interlock system
Cleandebris off mower
or Annually * Every 25 Hours
Checkmower for loose hardware
See Dealer Annually to
Lubricate mower
Checkmower blade **
Checkmower blade stopping time
Checkdrive belt
Cleanbattery and cables
* Whichever comes first
**Check blade more often in regions with sandy soils or
high dust conditions.
i i: ! ! i i! ii !! ! i i i i!i iiiiii i
First5 Hours
Changeengine oil
Every8 Hours or Daily ....................
Checkengine oil level
Every25 Hours or Annually *
Cleanengine air filter and pre-cleaner (if equipped) **
Every50 Hoursor Annually *
Changeengine oil
Replaceoil filter (if equipped)
Annually
Replaceair filter
Replacepre-cleaner (if equipped)
See Dealer Annually to
Inspect muffler and spark arrester (if equipped)
Replacespark plug
Replacefuel filter (if equipped)
Cleanengine air cooling system
* Whichever comes first
**Clean more often in dusty conditions or when airborne
debris is present.
16 www.snapper.corn