Maintenance; Maintenance Schedule - Snapper 355Z Series Operator's Manual

Maintenance
MaintenanceSchedule& Procedures
The following schedule should be followed for normal care of your rider and mower.You will need to keepa record of your
operating time. Determining operating time is easily accomplished by observing the elapsed time recorded by the hour meter.
SAFETY ITEMS Before Every 5 Every25 Every 100 Every Spring &
Each Hours Hours Hours 200 Fall
Use Hours
CheckSafety Interlock System . .
Check Mower BladeStopping Time • •
RIDER MAINTENANCE ITEMS Before Every 5 Every25 Every 100 Every Spring &
Each Hours Hours Hours 200 Fall
Use Hours
Check Rider/ Mower for loose hardware °
Check/ CleanEngine Cooling Fins •
Check/ Adjust PTOClutch •
Lubricate Rider & Mower ** °
Clean Battery & Cables .
CheckTire Pressure .
CleanDeck& ChecWReplace M ower Blades** .
CheckTransmission Oil •
ChangeTransmission Oil Filter * * •
ENGINE MAINTENANCE ITEMS Before Every 5 Every25 Every 100 Every Spring &
Each Hours Hours Hours 200 Fall
Use Hours
Check Engine Oil Level •
Check/Change Engine Air Filter *
ChangeEngine Oil & Filter *
Inspect Spark Plug(s) *
Check/ ReplaceFuel Filter *
* Refer to engine owner's manual. Changeoriginal engine oil after initial break-in period.
** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
26 www.snapper.com