Specification - Audiotrak Prodigy 192 Manual

Specification

1. Analog Input Specification
1) Type
2) Level
3) Impedance
2. Analog Output Specification
1) Type
2) Level
3) Attenuation
4) Impedance
3. MIC Preamplifier Specification
1) Sensitive
1) MIC Input Gain : +20dB Fix and 0dB ~ 22.5dB Variable(1.5dB Step Size)
3) Impedance
4) +5V Phantom Power, Multimedia MIC Support
4. Headphone Amplifier Specification
1) Output Power
2) Signal to Noise Ratio: 110dB (Typical)
3) (THD+N)/S
5. Sample rate supports
6. A/D Converter Specification
1) Type
2) Dynamic Range (S/N) : 100 dB A-Weighted (Typical)
3) Frequency Response : 20 ~ 22.5KHz (@ fs=48kHz)
4) Sample Rate Supports : Up to 96KHz
Line in: 3.5mm Mini Phone Jack
MIC in: 3.5mm Mini Phone Jack
Line in: -10dBV Unbalanced, -10dBV Nominal,
8dBV Max (Gain +0dB)
: 10K Ohm
: 6 Channel analog line output(3.5mm Mini Phone Jack)
: * -10dBV Unbalanced, -10dBV Nominal,
8dBV Max (Gain +0dB)
: Digital 0dB ~ -96dB with mute, 0.75 step size
: 100 Ohm
: 127mV Max
: 2K ohm
: 60mW Max
: -70dB, 0.03% (Typical)
:16,22,24,32,44.1,48,88.2,96,176.4,192KHz
(176.4,192KHz only playback)
: High performance SIGMA-DELTA ADC
57