Pull Down Menu - Audiotrak Prodigy 192 Manual

1. Pull Down Menu

The Prodigy 192 control panel includes a pull down menu bar that contains the
configuration menus for the Control Panel.
1. File - Exit
File – Exit will close the Prodigy 192 Control Panel window but it will not shut down
Prodigy
the Control Panel. You can always launch the Control Panel by clicking icon on
the system tray.
2. Config – Mouse Wheel
Mouse Wheel will control the mouse wheel adjustment. When you use the mouse wheel
to adjust the volume level, the adjustment step is set to ±1.5dB as default. You can
configure the adjustment steps to your preference.
- Step 1: When you move the mouse wheel one step, the fader will move by ±1.5dB.
- Step 2: When you move the mouse wheel one step, the fader will move by ±3.0dB.
- Step 4: When you move the mouse wheel one step, the fader will move by ±6.0dB.
- Step 8: When you move the mouse wheel one step, the fader will move by ±12.0dB.
3. Config – Latency
This will decide the latency of the Prodigy 192. You have to set proper latency depends
on your situation. Generally, higher latency is fit for Multi-track recording software
using multiple tracks. Process time maybe longer, but it's stable. Lower latency is fit for
software synthesizer, mastering software or Multi track software using only few tracks.
4. Config – Factory Default
This returns all the Prodigy 192 configurations to factory default setting.
5. Config - Always On Top
This will set the Prodigy 192 control panel to always over other Windows. If this is not
selected, the active windows will be set over the Prodigy 192 control panel.
6. Config – Card (This section is for future use)
21