Digital In - Digital Input Selector - Audiotrak Prodigy 192 Manual

1. LINE
When you select this button, Prodigy 192 accepts stereo LINE Input.
2. MIC
When you select this button, Prodigy 192 accepts MIC Input.
3. Monitor H.P
When you select this button, Analog Input signals goes to Output 1,2 and Output 5,6 is
changed to Headphone out.
You can monitor Input signal in real-time. You can monitor same signal out of Output
1,2 through Output 5,6.
5. Digital IN – Digital Input selector
When you connect Prodigy 192 with MI/ODI/O add-on card(sold separately), you can
get Optical and Coaxial Input. You can select between two digital connectors in here
and turn on and turn off the selected input monitoring.
Prodigy 192's input monitoring function is real-time monitoring and processing in
hardware.
That's why we recommend using this function although other software applications may
have Input monitoring function too.
Caution: When you select 'Monitor & H.P.' and start input monitoring, Output 5,6 will
be changed as Headphone. You can monitor same signal out of Line OUT 1,2 through
Output 5,6(H.P)
Caution: Please do not use software monitoring and hardware monitoring in
simultaneously.
You can't get accurate monitoring and it may causes flange effect.
Caution: It is not affect on recording in software. Regardless of this button, you can
record in software safely.
23