Table of Contents
Advertisement
Default - Loads default setup file. Select this option if you would like the application to
be started every time with a specific settings saved as a default setup through
'Setup\Save as default'.
Save setup on exit - If this option is on, the application automatically saves the current
setup to a file that can be loaded back on start-up. The auto-save file name is
autosave.aps and it's resided in the product installation folder.
Load bypass settings - If this option is on the state of bypass buttons are loaded from
the setup file.
Window Align - There are four options for aligning application window position on its
size change:
None - no align
Centered - The application window is centered along desktop
Left - The application retains left/top corner position
Right -The application retains right/top position
The latter mode is used when you want to keep application controls position on the
desktop unchanged.
Shorten plug in names in the list - If this option is checked, the plug in names that
don't fit the plug in slots list length are shortened to show left and right parts.
Start streaming on start-up - If this option is on the audio streaming is started
automatically on application start-up.
Maximum CPU Loading - Specifies the upper allowed CPU loading limit in percents.
When the loading exceeds this limit, the audio streaming is stopped and the
corresponding message is shown. This option prevents Native Sound Processor from a
crash or a hang up due to accident CPU overhead that might happen on loading of a new
plug in. By default it is set to 80%.
Caution: Before you use NSP application, You must set the DirectWIRE from
Prodigy 7.1 Control Panel.
*For more detailed info and operation, please refer to the 'Help' menu of the
software.
46
Advertisement
Table of Contents
