Audiotrak Prodigy 192 Manual page 39

Load on start-up - There are three options: Nothing, Autosave, Default:
Nothing - Loads nothing
Autosave - Loads a setup file automatically saved on the application exit. (See the
option below)
Default - Loads default setup file. Select this option if you would like the
application to be started every time with a specific settings saved as a default setup
through 'Setup\Save as default'.
Save setup on exit - If this option is on, the application automatically saves the current
setup to a file that can be loaded back on start-up. The auto-save file name is
autosave.aps and it's resided in the product installation folder.
It's enough for the quick start so let's close the application just be pressing 'Exit' button.
Next time you run the application you can load the saved setup by pressing 'Setup'
button and selecting 'Load As' item.
39