Audiotrak Prodigy 192 Manual page 37

in drop-down Config combo-boxes for slots 1 and 2 respectively. Then select the input
and output channels for these two slots according to your audio card specification. Press
'Ok' button to close the dialog.
Let's clarify why there are two sets of settings in Native Sound Processor: Application
settings that are accessible through Options\Settings and Setup Settings accessible
through Setup\Settings. The first set corresponds to general settings which are altered
rarely from run to run and they are common to any instance of the application. These
settings are saved automatically and loaded on the application start-up. The second
set includes settings that are changing frequently from session to session and even
from instance to instance. This includes loaded plug ins configuration, their state and
presets and I/O routing. This set is called setup and it can be saved and loaded as a file
and like general settings the setup can be automatically loaded on start-up.
It's time to load VST plug ins. Select the first (the topmost) slot in the plug in slot list.
(it should be already selected by default) Press 'Plug-in >' button and select 'All plug-
ins' item. It will show a pop-up sub menu with the list of VST plug ins found in the
selected VST folder. So just select your guitar distortion VST plug in ( or if the plug in
you want to load is located elsewhere, select 'Browse' menu item and locate the plug in
by your own). Either way you have selected the plug in, it's loaded. After it's loaded, the
37