Pull Down Menu Bar - Audiotrak MAYA44 Manual

8. Pull down Menu Bar

The MAYA44 Control Panel includes a pull down menu bar that contains the configuration for the
Control Panel.
1. File - Exit
File – Exit will terminate the MAYA44 Control Panel but it will not shut down the Control Panel. You can
launch the Control Panel by clicking on the MAYA44 icon in the system tray.
2. Config – Mouse Wheel
The Config –Mouse Wheel will control the mouse wheel adjustment. When you use the mouse wheel to
adjust the volume level, the adjustment step is set to ±1.5dB. You can configure the adjustment steps to
your preference.
- Step 1 : When you move the mouse wheel one step, the fader will move by ±1.5dB.
- Step 2 : When you move the mouse wheel one step, the fader will move by ±3.0dB.
- Step 4 : When you move the mouse wheel one step, the fader will move by ±6.0dB.
- Step 8 : When you move the mouse wheel one step, the fader will move by ±12.0dB.
3. Config – Sample Rate
The Sample Rate option gives you two sample rate available for the MAYA44. The sample rate must be
selected here, then the same sample rate has to be set in your application. Selected sample rate display in
the control panel display.
- 44100 : Select 44.1kHz.
- 48000 : Select 48kHz.
4. Config – Latency
This will decide the latency of the MAYA44.
5. Config – Factory Default
This returns all MAYA44 configurations to their default setting.
6. Config - Always On Top
This will set the MAYA44 Control Panel to always display over other windows. If this is not selected, the
active windows will be set over the MAYA44 Control Panel.
45