Audiotrak MAYA44 Manual page 37

3. Analog Output ports (1 ~4) have two different mode.
- Using 4 Output ports
In this case, analog outputs 1~4 works as output ports of a wave device. You can set up these in your
application or Windows Multimedia properties. This mode is usually used for multiple outputs when you
use a mixer or a multi-track recorder. You can use these in multi-track recording programs such as Cubase
and Cakewalk.
*** In the below picture, Indicated as black arrow connection.
- Output 1 and 2 use as 2 Channel Main monitoring mode / Using Headphone
You can use this mode when you don't have a mixer or you want 2-channel mix down and master output.
Output 1 and 2 port become stereo master output of the MAYA44.
The merit is that you can monitor all Inputs and outputs of the MAYA44 through Output 1,2.
Simultaneously, Output 3,4 port use as headphone monitoring port. Select headphone button on the
control panel, you can monitor output 1,2 using headphone.
*** In the below picture, Indicated as black and white arrow connection.
37