Audiotrak MAYA44 Manual page 33

1. Analog 1,2 Input port / MIC Input port
- Using stereo 55-phone jack, one port accepts two (1 & 2) channel input.
- This Input port uses for Mic Input also. You can choose Analog 1,2 channel input or Mic Input on the
control panel of the MAYA44.
*** The MAYA44 allowed using only one Microphone.
2. Analog 3,4 Input port
- Using stereo 55-phone jack, one port accepts two (3 & 4) channel input.
3. Analog 1,2 Output port/ Main monitoring port
- Using stereo 55-phone jack, one port sends out two (1 &2) channel output.
- This output port uses as main stereo output port also.
4. Analog 3,4 Output port / Headphone port
- Using stereo 55-phone jack, one port sends out two (3 &4) channel output.
- This output port uses for headphone port also. You can choose Analog 3,4 channel output or headphone
port on the control panel of the MAYA44.
*** All analog Input/Output are Unbalanced. Each channels are used with –10dBv reference level.
5. Coaxial SPDIF Output port
The MAYA44 has a stereo digital coaxial output that can be connected to other digital equipment by an
RCA cable. You can use it with an external device with digital inputs such as a DAT machine.
*** Caution - Even though the same RCA cable is used, the digital output is different from analog. The
digital output uses one RCA port to send out a stereo signal whereas analog needs to use a couple of ports
to send out the stereo signal.
6. Optical SPDIF Output port
The MAYA44 has a stereo digital output in optical format. You can connect it to an external device that is
using the optical input as a digital input. It can be used to connect to an MD or CD recorder.
*** Caution – The Coaxial and Optical outputs mentioned above send out the same signal. You cannot
set them to send out other sources.
33