Wave 1,2,3,4 - Wave Out Level Fader, Level Meter - Audiotrak MAYA44 Manual

2. WAVE 1,2,3,4 – Wave Out Level Fader, Level Meter
The Wave Out Level Fader is the output volume control fader that controls outputs 1~4 of the MAYA44.
All 4 level fader act the same so you need to learn only one. You can adjust the volumes of wave files,
multimedia files, and the sound of games that the MAYA44 PCI card controls. The term 'Wave' means
the sound that is generated by the computer. The input monitoring level cannot be controlled here.
1. Level Fader
The Level fader will change the level of the 'Wave Out' volume. You can control outputs 1~4 individually
or control the stereo pairs like outputs 1-2 and 3-4. You need to move the mouse pointer over the specific
port fader to adjust it individually or move the mouse pointer over the middle of the two ports to adjust it
as a stereo channel. If the port fader(s) is selected, it will turn into a brighter color.
You can move the fader in three different ways. Basically, the volume level can be adjusted by ±1.5dB.
- Drag the faders you press the left mouse button.
- Select the fader with the mouse cursor and adjust with the mouse wheel. You can select the steps from
the pull down menu, 'Config.'->'Mouse Wheel.'
- Select the fader with the mouse cursor and use the up and down arrows of your keyboard.
2. Level Meter
The Level meter displays the signal level of the wave signal. You can see the level of each output to
compare them and adjust the level on the basics of these meters. If you wish to send out a wave file to an
external device, refer to the level meters to adjust the signal to the proper level.
3. Output Level Indicator
The Output Level Indicator shows the current level setting for each of the outputs. You can compare the
output levels based on this indicator in order to adjust the output level to a desired level. Move the output
level fader in order to set it to a proper level.
!!! Caution!!! – The Wave Out Level Fader can be misunderstood to control the outputs of the MAYA44
that comes from output ports 1~4. The MAYA44 Wave Output Level Fader is able to control the level of
the waves that are generated by the computer. It can NOT control all output levels.
42