Mic Preamp; H-Phone -Headphone Amp On/Off Switch; Sample Rate Display - Audiotrak MAYA44 Manual

3. CD – CD Input Select
As you press this button, The MAYA44 will take the input from the CD-ROM connection on the PCI card.
You can play and record CD music from your CD-Rom Drive. You have to select '1-MAYA44 Wave' on
Input device of applications.
4. All – All source Input in same time
This function is made for Internet broadcast. When you select this button, Line, Mic, CD and all wave
source come to Input source. When you do Internet broadcasting, you can use Mic and Music at the same
time.

5. Mic Preamp

Select the proper settings for your mic. You can select the input level and phantom power.
This will work when you select 'MIC' in Input select.
1. +20dB
When this button is engaged, the MIC preamp will amplify the level of the input from the mic by +20dB.
The mic input level is less than the line input level, and this mic preamp needs to be on when use mic.
2. PHANTOM
When you use a condenser mic that requires external power, the MAYA44 will supply 12V power to the
mic. This is called Phantom Power and this will allow you to plug a mic directly into the MAYA44 input
without going through an external mixer or an additional mic preamp.
6. H-phone –Headphone Amp On/Off switch
The MAYA44's Analog Output port 3,4 will use as headphone amp. It can adjust with output 1,2.

7. Sample Rate Display

This will display MAYA44 sample rates.
44