In 1,2,3,4 - Input Level Control Fader, Level Meter - Audiotrak MAYA44 Manual

1. IN 1,2,3,4 – Input Level Control Fader, Level Meter
The input Level Fader will control the input volume level of inputs 1~4 of the MAYA44. All 4 input level
faders work in the same way.
1. Level Fader
The Level Fader controls the input level. You can control levels 1~8 individually or as pairs like 1-2 and
3-4 in stereo. Move the mouse pointer over specific port fader to adjust the level individually. To adjust a
stereo level, move the mouse over the middle of the stereo ports. The selected port fader(s) will turn into a
brighter color to indicate the selected port(s).
You can move the fader in three different ways. Basically, the volume level can be adjusted by ±1.5dB.
- Drag the fader as you press the left mouse button.
- Select the fader with the mouse cursor and adjust with the mouse wheel. You can select the steps from
the pull down menu, 'Config.' -> 'Mouse Wheel.'
- Select the fader with the mouse cursor and use the up and down arrows of your keyboard.
2. Level Meter
The Level Meter will display incoming signal levels. This will be active when there is a signal coming
from an input port. All 4 channels have their own meter so you can compare the inputs and adjust them.
You can use the level even though you do not monitor the inputs.
3. Input Level Indicator
The Level Indicator shows the current level set for the input. By comparing these, you can set up the input
level with external device and other inputs. You can adjust it by moving the input level fader.
4. 'M' – Analog 1,2 Master Output / Monitoring button – This button is most important. The function
is that send channel sound to Analog out 1,2 port and you can monitor it. So Analog 1,2 become Master
Output.
For example, when you press 'M' button under the IN 1,2 channel, Analog 1,2 Input can monitor in
Analog Output 1,2. The case of IN3,4 is also can monitor in Output 1,2 port.
41