Gvrp Settings - D-Link xStack DGS-3324SRi User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

GVRP Settings

In the Configuration menu, open the VLANs folder and click GVRP Settings.
The GVRP Settings dialog box, shown below, allows the user to determine whether the Switch will share its VLAN
configuration information with other GARP VLAN Registration Protocol (GVRP) enabled switches. In addition, Ingress
Checking can be used to limit traffic by filtering incoming packets whose PVID does not match the PVID of the port.
Results can be seen in the table under the configuration settings, as seen below.
Figure 6- 41. GVRP Settings and GVRP Table window
The following fields can be set:
82