xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
Port Configuration
This section contains information for configuring various attributes and properties for individual physical ports, including
port speed and address learning. Clicking on Port Configuration in the Configuration menu will display the following
window for the user:
Figure 6- 5. Port Configuration and The Port Information Table window
To configure switch ports:
1. Choose the port or sequential range of ports using the From...To... port pull-down menus, and the Unit ID of the
Switch to be configured.
2. Use the remaining pull-down menus to configure the parameters described below:
Parameter
State <Enabled>
Description
Toggle the State <Enabled> field to either enable or disable a given port or group
of ports.
43