Config Firmware Image - D-Link xStack DGS-3324SRi User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

Config Firmware Image

The Config Firmware Image window allows users to configure firmware images saved in the memory of the Switch. To
access the following window, click Maintenance > MULTIPLE IMAGE Services > Config Firmware Image.
This window offers the following information:
Parameter
Image
Action
Click Apply to implement changes made.
Figure 10- 7. Config Firmware Image window
Description
Select the firmware image to be configured using the pull-down menu. The Switch
allows two firmware images to be stored in the Switch's memory.
This field has two options for configuration.
Delete – Select this option to delete the firmware image specified in the
•
Image field above.
Boot – Select this option to set the firmware image specified above as the
•
boot up firmware for the Switch. This firmware will be set as the boot up
firmware after a switch reboot has been performed. The default setting has
firmware image ID 1 as the boot up firmware image for the Switch unless
specified here.
296