ProScan PS27125JX1BB User Manual page 50

(Channel Menu continued)
Auto Tuning Displays a choice list that lets you set up the TV to
automatically tune to the correct input channel when you press a
component button (VCRJ, DVD,VCR2, or SAJ-CABLE).
Set VCR 1 Channel Displays a choice list that lets you select the
channel that the TV tunes to when you press the VCR1 button.
Set DVD/VCR 2 Channel Displays a choice list that lets you select
the channel that the TV tunes to when you press the DVD,VCR2
bu_on.
Set SAT/Cable Channel Displays a choice list that lets you select
the channel that the TV tunes to when you press the SAJ oCABLE
button.
The choices are:
Not Connected Choose this if you do not have a component
connected to an antenna or video input on the back of the TV,
or if you don't want the TV to tune to a channel when the
particular component button is pressed.
Channel 2 (SAT/Cable only) Choose this if your component is
connected to the antenna jack on the back of the TV, and you
want the TV to tune to channel 2 when you press the specified
component button. Reminder: Make sure the component's Ch
2/3/4 switch is set to channel 2.
Channel 3 Choose this if your component is connected to the
antenna jack on the back of the TV, and you want the TV to tune
to channel 3 when you press the specified component button.
Reminder: Make sure the component's Ch 3/4 switch is set to
channel 3.
Channel 4 Choose this if your component is connected to the
antenna jack on the back of the TV, and you want the TV to tune
to channel 4 when you press the specified component button.
Reminder: Make sure the component's Ch 3/4 switch is set to
channel 4.
Video 1 Input Choose this if your component is connected to the
Video 1 jacks on the back of the TV and you want the TV to tune
to Video1 input when you press the specified component button.
Video 2 Input Choose this if your component is connected to the
Video 2jacks on the back of the TV and you want the TV to tune
to Video 2 input when you press the specified component button.
48