Function Tests - Genie GS-3384 Operator's Manual

Hide thumbs Also See for GS-3384:
Table of Contents

Advertisement

Operator's Manual

Function Tests

Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator's
manual.
1 Avoid hazardous situations.
2 Always perform a pre-operation
inspection.
3 Always perform function tests prior to
use.
Know and understand the function tests
before going on to the next section.
4 Inspect the workplace.
5 Only use the machine as it was intended.
16
Genie GS-3384 & GS-3390 & GS-4390 & GS-5390
Second Edition • Third Printing
Fundamentals
The function tests are designed to discover any
malfunctions before the machine is put into service.
The operator must follow the step-by-step
instructions to test all machine functions.
A malfunctioning machine must never be used. If
malfunctions are discovered, the machine must be
tagged and removed from service. Repairs to the
machine may only be made by a qualified service
technician, according to the manufacturer's
specifications.
After repairs are completed, the operator must
perform a pre-operation inspection and function
tests again before putting the machine into service.
1 Select a test area that is firm, level and free of
obstruction.
At the Ground Controls
2 Pull out the platform and ground red Emergency
Stop buttons to the on position.
3 Turn the key switch to ground control.
Result: The LCD screen will come on and
display
SYSTEM READY
Note: In cold climates, the LCD readout screen will
need to warm up before the display appears.
4 Start the engine. See Operating Instructions
section.
Test Emergency Stop
5 Push in the ground red Emergency Stop button
to the off position.
Result: The engine should turn off and no
functions should operate.
6 Pull out the red Emergency Stop button to
the on position and restart the engine.
.
Part No. 82828

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs-4390Gs-3390Gs-5390

Table of Contents