Featuresand Controls - Troy-Bilt 2550 PSI Operator's Manual

Featuresand Controls
_i ead this Operator's Manual and safety rules beforeoperating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
//
\
\\
\\
\,. _/_
..... /
A - SprayGun-- Controls the application of water onto
cleaning surface with trigger device, includes trigger lock.
B - Warning/Operating/nstructlons Tag- identifies
hazards and proper procedure to start!stop pressure
washer.
C - Nozzle Extension with Quick Connect-- Allows you to
switch between three different spray tips.
B - Recoil Starter-- Used for starting the engine manually.
E- Fuel Tank-- Fill tank with regular unleadedfuel. Always
leave room for fuel expansion.
F- Throttle Lever-- Sets engine in starting mode for recoil
starter and stops a running engine.
G - Choke Lever-- Preparesa cold engine for starting.
H- Air Filter-- Protects engine by filtering dust and debris
out of intake air.
d - Pump-- Developshigh pressure.
K- AutomaticCool Down System- Cycleswater through
pump when water reaches125°-155°F (51°0-68°C).
Warm water will discharge from pump onto ground. This
system prevents internalpump damage.
L - Detergent Siphoning Tube/Fitter-- Use to siphon
pressure washer safe detergents into the low pressure
stream.
M - Nigh Pressure Outlet-- Connection for high pressure
hose.
N - Water Inlet-- Connection for garden hose.
P - Off Fill/Dipstick-- Check and fill with oil here.
R - Nigh Pressure Nose -- Connect one end to water pump
and the other end to spray gun.
S - Accessory Tray-- Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
T- Spray Tips-- Detergent, 0°, and 25°: for various high
pressure cleaning applications.
Items Not Shown:
Data Tag (near rear of base plate) -- Provides model and
serial number of pressure washer. Pleasehave these readily
available if calling for assistance.
0
;=1
11