Features And Controls - Troy-Bilt Pressure Washer Operator's Manual

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E F
,
G
H
A - Spray Tips — Detergent, 0° and 25°: for various high
pressure cleaning applications.
B - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
C - Nozzle Extension with Quick Connect — Allows you to
switch between three different spray tips.
D - Oil Fill/Dipstick — Check and add engine oil here.
E - Pump — Develops high pressure.
F - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F (51°-68°C). Warm
water will discharge from pump onto ground. This system
prevents internal pump damage.
G - High Pressure Outlet — Connection for high pressure
hose.
H - Detergent Siphoning Tube — Use to siphon pressure
washer safe detergents into the low pressure stream.
J - Water Inlet — Connection for garden hose.
10
K - Air Filter — Protects engine by filtering dust and debris
out of intake air.
M - Recoil Starter — Used for starting the engine manually.
N - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
P - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
R - Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
Items Not Shown:
Identification Label (near rear of base plate) — Provides
model and serial number of pressure washer. Please have
these readily available if calling for assistance.
Warning/Operating Instructions Tag — Identifies hazards
and proper procedure to start/stop pressure washer.
R
P
N
M
K
J
www.troybilt.com