Specifications; Product Specifications; Commonservice Parts - Troy-Bilt 2550 PSI Operator's Manual

,®
Pressure
Product Specifications
Max Outlet Pressure............ 2,550 PSi (175.8 BARS)
Max How Rate ................ 2.3 GPM (8.7 liters/rain)
Water Supply Temperature ........... IO0°F (38°C) MAX
Shipping Weight ..................... 73 Ibs. (33.1 kg)
Displacement ................... 11.57 cu. in. (190 cc)
Spark Plug Gap ................... 0.030 in. (0.76 mm)
Fuel Capacity ...................... 1.6 Qt. (1.5 Liters)
Oil Capacity .................... 20 Ounces (0.6 Liters)
CommonService Parts
PumpSaver .................................. 6039
O-Ring Maintenance Kit ........................ 6048
Water inlet Screen ......................... B2384GS
Air Cleaner ........................ 491588S or 5043
Resistor Spark Plug ................ 802592S or 5095D
Long Life Platinum Spark Plug .................. 5062D
Engine Oil Bottle ................... 100005 or 100028
FuelStabilizer ...................... 100002 or 5041D
Spark Attester .............................. 398067
Power Ratings: The gross power rating for individual gas engine models is labeled in accordancewith SAE (Society of
Automotive Engineers)code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordancewith SAEJ1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower
values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient
operating conditions and engine-to-enginevariability. Givenboth the wide array of products on which enginesare placed and
the variety of environmental issues applicableto operating the equipment, the gas engine will not developthe rated gross power
when used in a given pieceof power equipment (actual "on-site"or net power). This difference is due to a variety of factors
including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-enginevariability. Due to
manufacturing and capacity limitations, Bfiggs & Stratton may substitute an engine of higher rated power for this Series engine.
This pressure washer is rated in accordanceto the PressureWasher Manufacture Association (PWMA) standard PW101
(Testing and Rating Performance of Pressure Washers).
Briggs & StrattonPowerProductsGroup,LLC
900 N. Parlay
Jefferson,Wisconsin, 53549 U.S.A.
28 (888) 611-6708 www.troybilt.corn