Operatorsafety; Equipmentdescription; Safety Rules - Troy-Bilt 2550 PSI Operator's Manual

Operator Safety
EquipmentDescription
Read this manual carefully and becomefamiliar
with your pressure washer. Knowits applications,
its limitations, and any hazardsinvolved.
This pressure washer operates at a maximum of 2,550 PSi
(175.8 BARS)and a flow rate of up to 2.3 gallons per minute
(8.7 liters per minute). This high quality residential system
features 10" (25.4 cm) wheels, axial cam pump with
stainless steel pistons, automatic cool down system,
detergent siphoning system, quick connect spray tips, safety
goggles, heavy duty 25' (7.6 m) hose, and more.
Every effort has been made to ensure that information in this
manual is accurate and current. However, we reserve the
right to change, alter, or otherwise improve the product and
this document at any time without prior notice.
The Emission Control System for this pressure washer is
warranted for standards set by the Environmental Protection
Agency and the California Air Resources Board.
Safety Rules
,&This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messagesthat follow this symbolto avoid
possibleinjury or death.
The safety alert symbol (_.) is used with a signal word
(DANGER,CAUTION,WARNING), a pictorial and/or a safety
message to alert you to hazards. DANGERindicates a hazard
which, if not avoided, will result in death or serious injury.
WARNINGindicates a hazardwhich, if not avoided, could
result in death or serious injury. CAUTIONindicates a hazard
which, if not avoided, might result in minor or moderate
injury. NOTICE,indicates a situation that could result in
equipment damage. Follow safety messages to avoid or
reducethe risk of injury or death.
WARNING
The engine exhaust from this product containschemicals
knownto the State of California to cause cancer, birth
defects, or other reproductive harm.
©
A - Explosion
B - Fire
C - Electric Shock
D - Toxic Fumes
E- Kickback
F - Hot Surface
G - Flying Objects
H - Slippery Surface
I - Fail
J - Fluid Injection
K- Moving Parts
L - Read Manual
4 www.troybiit.com