Radio Operation; Tuning Into A Station Manually; Fm Stereo; Weak Fm Stations - Audiovox DV5007 - 500with 5 DVD Home Theater System Owner's Manual

Tuning into a station manually

1. Press FUNCTION button on the remote or on the front panel
until the frequency band appears on the display.
2. Press the BAND button to select the desired band.
3. Press the TUNING
desired station.

FM Stereo

• Press the FM MODE button on the remote until "

Weak FM stations

• Press the FM MODE button on the remote until the "
be reduced but the signal reproduced will be mono. To restore stereo reception, press the FM MODE button on
the remote to select STEREO.
Note:
• The left / right front speakers and subwoofer are activated only.

To search for a station automatically

• Hold down the TUNING
After tuning in a station, the search stops.
• The search may not stop at a station with a very weak signal.

Presetting stations

You can tune into a stored station directly by entering the preset number.
20 stations on FM band can be preset.
20 stations on AM band can be preset.
1. Press FUNCTION button until the frequency band appears on the display.
2. Press the BAND button to select the desired band.
3. Use the TUNING
4. Press the MEMORY button on the remote.
5. Press the NEXT or PREV
store the station.
6. Repeat steps 2-5 to store other stations.

Tuning into a preset station

1. Press FUNCTION button until the frequency band appears on the display.
2. Press the BAND button to select the desired band.
• Press the PLAY button and
panel to select the presetted station or use the numbered buttons to enter the number to select the presetted station.
Example: To select preset number 15, press the +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.

Radio Operation

button on the remote to tune in the
buttons on the remote for 1 to 2 seconds, and a station is searched for automatically.
button to find your desired station.
button to select the preset number and press the MEMORY button on the remote to
NEXT or PREV
" appears on the display.
" word appears on the display. Background noise will
button on the remote, or press the
E - 28
PLAY button on the front