Connecting A Vcr - Audiovox DV5007 - 500with 5 DVD Home Theater System Owner's Manual

B. Connecting a VCR
1. Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN
jack on your TV, connect the left/right AUDIO OUT jacks on your Unit to left/right AUDIO IN jacks on your TV. If you
want the sound come from the speakers of the Main Unit, you need not to connect the left/right AUDIO OUT
jacks from the Main Unit to your TV.
2. Using the Video cable (not supplied), connect the VIDEO IN (VCR) jack on your Unit to VIDEO OUT jack on your
VCR.
3. Using the Audio cable (not supplied), connect the left/right AUDIO IN jacks on your Unit to the AUDIO OUT jacks
on your VCR.
Listen to TV shows through the home theater system
Sound from the television does not go to the speakers of the home theater system when you use the suggested
connections shown above. To hear sound from TV shows through the home theater system you need to use your
VCR as a television tuner. Follow these steps:
1. Connect the VCR as shown above in "Connecting a VCR".
2. Press the FUNCTION button on the DVD Amplifier Unit to go to AV_IN mode, shown on the front panel display.
3. On the television, select the AV input channel that the home theater system is connected to.
4. On the VCR, select the television channel you want to watch.
5. On the DVD amplifier Unit select normal stereo or Pro Logic decoder modes according to your preference.
• Please refer to the AV_IN rows of the table on page 16 describing which speakers the sound will come out of.
• When using the VCR as a television tuner, you cannot watch one programme while recording another.
Watching a DVD
1. Turn on the Unit, use the FUNCTION button on the remote control or the front panel to select "DVD".
2. Turn on your TV and follow the instructions included with it to select the VIDEO input which corresponds to the
VIDEO IN jack that is connected to the Unit.
Watching a Videotape
1. Turn on the Unit, use the FUNCTION button on the remote control or the front panel on the front panel to select
"AV_IN".
2. Turn on your TV and follow the instructions included with it to select the VIDEO input which corresponds to the
VIDEO IN jack that is connected to the Unit.
3. Turn on the VCR and follow the instructions included with it to play the videotape.
Note:
• If you have a mono VCR, the sound volume will be low.
DVD Unit
Audio/Video cable (supplied)
Setup
(yellow)
Video cable
(not supplied)
(white)
Audio cable
(red)
(not supplied)
(white)
(red)
(yellow)
E - 12
(continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page)