Table of Contents
Advertisement
or
Component video outputs (DVD)
Some TVs or monitors are equipped with component video inputs.
Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks
on your TV and using a Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your
Unit to Y VIDEO IN jack on your TV, the Blue plug P
TV and the Red plug P
/C
R
picture playback.
Progressive outputs (DVD)
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively
scanned video signal.
Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks
on your TV and using a Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your
Unit to Y VIDEO IN jack on your TV, the Blue plug P
TV and the Red plug P
/C
R
picture with less flicker.
Connect the component video cable to TV, press SETUP button and select Video Output to YUV. To select the output
signal for better picture quality, press the P. SCAN button on the remote control when DVD is stopped. "P. SCAN" will
display.
Notes:
• When progressive output is activated, no video signal is sent from the S-video or RCA (CVBS) video jacks.
• Make sure your TV supports progressive scan component video signal, press the P. SCAN button twice until
"CVBS" display for going back CVBS video signal.
or
Coaxial Antenna Jack
Some TVs do not have an RCA or S-Video jack, they only have a coaxial antenna jack. In order to connect this Unit to
these TVs, you must purchase an RF modulator (available in the Audio/Video department of most electronics retailers
or at http://www.18002526123.com) and follow the instructions included with it.
Notes :
• Connect the Unit to your TV directly. If you connect the Unit through a VCR, the playback picture will be distorted
because DVD discs are copy protected.
• When you connect the Unit to other equipment, be sure to turn off the power and unplug all of the equipment from
the wall outlet before making any connection.
• For more information, refer to the instruction manual of the connected equipment.
B
VIDEO OUT jack on your Unit to P
R
B
VIDEO OUT jack on your Unit to P
R
DVD Unit
To PR/CR VIDEO OUT
To PB/CB VIDEO OUT
To Y VIDEO OUT
Setup
/C
VIDEO OUT jack on your Unit to P
B
/C
VIDEO IN jack on your TV to view the higher quality
R
R
/C
VIDEO OUT jack on your Unit to P
B
/C
VIDEO IN jack on your TV to enjoy highest quality
R
R
Component
video cable
(not supplied)
Audio cable (not supplied)
E - 11
/C
VIDEO IN jack on your
B
B
/C
VIDEO IN jack on your
B
B
To
PR/CR
VIDEO IN
To
PB/CB
VIDEO IN
To
Y
VIDEO IN
(white)
(red)
(continued on next page)
(continued on next page)
(continued on next page)
(continued on next page)
(continued on next page)
Advertisement
Table of Contents
