Samsung Esa PDP4294LV Owner's Instructions Manual page 62

to up Your PC i}
The Windows display-settings for a b,picai computer are shown below. However, the actual screens
on your PC will probably be different, depending upon your particular version of Windows and your
particular video car& But even if your actual screens look different, the same, basic set-up information
wiJJapply in almost oil cases. (If not, contact your computer manufacturer or ESA DeaJen)
On the windows screen, select in the following
sequence : Start _ Settings _ Control Panek
_coessib @
Add Ne_ Add/R emov_ Adobe Gar_p_
Option Hald_ale PFo_r_s
Date/1 _ae Display Find Fas_ Fonts Gaffe
U_e the Se_dng_ fn Co tTollel
ConU'ol Psnel to
pel _on_F ze ,_ouz
compute
HP Jet&df_,in In_eme_ Keyboald LiveUpdate Nail _*d F_
Select an tern to view it
description
_'4 _!:9s 3 t _: r,-,
Node r_ Noue tduRi{ _dia Ne_wolk Pa s$_qrU
When the control panel screen appears,
double-click on "Display" and a display
dialog-box vviJJ appear.
Select the "Settings" tab inthe display diaiog-
box.
The _'o key variables that apply to the PDP-PC
interface are "resolution" and "colors".
The correct settings for these two variables are:
', Size (sometimes called "resolution"):
640 x 480 pixeis.
', Color: "24-bit" color (might also be expre-
ssed as "16 million cdors'}Shown at left is
a typical screen for "Display" dialog box.
If a vertical-frequency option exists on your
display settings dialog box, the correct value is
"60" or "60 Hz." Otherwise, just click "OK"
and exit the dialog box.
62
Continued._