Samsung Esa PDP4294LV Owner's Instructions Manual page 45

BN68-00711A-00esa_E2(walldel) 2004.4.30 2:55 PM Page
When you press the Aspect button on the remote control, the PDP's screen mode should appear in
sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Normal.
', If you watch a still image or the Normal (4:3) mode for a long time (over 2 hours), an image may
be burned onto the screen. View the monitor in Wide or Panorama mode as much as possible.
Wide
Sets the picture to 16:9 wide mode.
The screen size when the Zoom 1 screen is
vertically enlarged.
c::>O
ooo
Converts regular 4:3 aspect ratio screen to
wide screen.
Q
0
Nermd (4:3)
Setsthepicture t o4:3 normaJmode
Zoom 'J
The screen size when Wide screen is vertically
enlarged.
Q C)Q
o In TV, VIDEO, S_VIDEO and Component(480i) modes, all screen modes can be selected.
(Wide _ Panorama _ Zoom1 _ Zoom2 _ Normai).
', In PCiDVI mode, only Wide & Normal modes can be selected.
', In Component(480p, 720p. 10800 modes, Panorama mode can't be selected.
In Component(480p, 720p. 1080i} modes, you can move the picture on screen by pressing
the UpA or Downy button. (AJJscreen modes)
Changing the screen size to Normal, Zoom1 or Zoom2 during PIP mode will cause the PIP
window to disappear.
45