Samsung Esa PDP4294LV Owner's Instructions Manual page 18

To complete this connection you will need a _'o_way splitter, a RF (A/B} switch, and four coaxiai
cables (which you can buy from your ESA dealer or any electronics store).
1
Find and disconnect the cable that is con-
nected to the ANTENNA IN terminal of
your cable box.
This terminal might be labeled "ANT iN",
"VHF IN", or simply, "IN". Connect this
cane to a two_way sphtter.
Cable
Connect a coaxial cable between an OUT-
PUT terminal of the splitter and the IN termi-
nal of the cable box.
Incoming
Cable
Splitter
Splitter
Cable Box
Connect a coaxial cane between the
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the AiB switch.
Incoming
Cable
Splitter
Cable Box
RF (A/B}
Switch
Connect a coaxial cable between the ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
Incoming
Cable
Splitter
Cable Box
Cable Box
RF (A/B)
Switch
Connect the last coaxiai cable between the
OUT terminal of the RF (A/B} switch and
the VHF!UHF terminal on the PDP.
Incoming
Cable
Spl_tter
After you've made this connection, set the A/B switch to the "A" position for normat viewing.
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch
to "B", you win need to tune your Set-Top Box to the cable box's output channd,
which
is usuaiJy
channel 3 or 4.}
18